Table C.20 SEA_STATE_CATEGORY, Reference

Change "[WMO306, Volume I.1, Part A, Code table 37000, Symbolic Letter S - State of the sea]" to "[WMO306, Volume I.1, Part A, Code table 3700, Symbolic Letter S - State of the sea]".

Table C.20 SEDIMENT_ATTENUATION_FREQUENCY_EXPONENT, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE attenuation exponent quantity"]'.

Table C.20 SEDIMENT_ATTENUATION_FREQUENCY_EXPONENT, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_BASEMENT_REFLECTION_COEFFICIENT, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE basement reflection coefficient quantity"]'.

Table C.20 SEDIMENT_BASEMENT_REFLECTION_COEFFICIENT, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_COMP_WAVE_SPEED_GRADIENT_TOP, Reference

Change to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE surface sediment sound speed gradient rate"]'.

Table C.20 SEDIMENT_COMP_WAVE_SPEED_GRADIENT_TOP, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_MEAN_BACKGROUND_THICKNESS, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE near surface average layer thickness dimension"]'.

Table C.20 SEDIMENT_MEAN_BACKGROUND_THICKNESS, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_REFLECTIVITY_ANGLE, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE reflectivity angle"]'.

Table C.20 SEDIMENT_REFLECTIVITY_ANGLE, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_SRF_ATTENUATION_GRADIENT, Reference

Change to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE surface attenuation rate"]'.

Table C.20 SEDIMENT_SRF_ATTENUATION_GRADIENT, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_SURFACE_DENSITY, Reference

Change to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE sediment surface density rate"]'.

Table C.20 SEDIMENT_SURFACE_DENSITY, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_THIN_LAYER_DENSITY, Reference

Change to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE thin layer density rate"]'.

Table C.20 SEDIMENT_THIN_LAYER_DENSITY, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_THIN_LAYER_THICKNESS, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE thin layer thickness dimension"]'.

Table C.20 SEDIMENT_THIN_LAYER_THICKNESS, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_TWO_WAY_TRAVEL_TIME, Reference

Change '[OAML, Low-Frequency Bottom-Loss Database]' to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE two-way travel-time quantity"]'.

Table C.20 SEDIMENT_TWO_WAY_TRAVEL_TIME, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SEDIMENT_WATER_COMP_WAVE_SPEED_RATIO, Reference

Change to '[JMCDM, "LOW-FREQUENCY-BOTTOM-LOSS-PROVINCE sediment to water sound speed rate"]'.

Table C.20 SEDIMENT_WATER_COMP_WAVE_SPEED_RATIO, Supplemental References

Add "[OAML, Low-Frequency Bottom-Loss Database]".

Table C.20 SENSIBLE_HEAT_FLUX, Reference

Change '[GMET]' to '[JMCDM, "EARTH-SOLAR-RADIATION-ANALYSIS-FORECAST sensible heat flux rate"]'.

Table C.20 SENSIBLE_HEAT_FLUX, Supplemental References

Add '[GMET, "energy balance" and "heat flux"]'

Table C.20 SEVERE_WEATHER_PRESENT, Reference

Change '[WMO182, "severe weather"]' to '[WMO182, S0780, "severe weather"]'.

Table C.20 SHIPPING_NOISE_SPECTRAL_POWER_LEVEL_ROLL_OFF, Reference

Change '[OAML, Shipping Noise Database]' to '[JMCDM, "HIGH-RESOLUTION-OMNIDIRECTIONAL-SHIP-NOISE rolloff rate"]'.

Table C.20 SHIPPING_NOISE_SPECTRAL_POWER_LEVEL_ROLL_OFF, Supplemental References

Add "[OAML, Shipping Noise Database]".

Table C.20 SHIPPING_NOISE_STD_DEV, Reference

Change '[OAML, Shipping Noise Database]' to '[JMCDM, "OMNIDIRECTIONAL-NOISE-STANDARD-DEVIATION fifty hertz quantity"]'.

Table C.20 SHIPPING_NOISE_STD_DEV, Supplemental References

Add "[OAML, Shipping Noise Database]".

Table C.20 SHOWALTER_ATMOSPHERE_STABILITY_INDEX, Reference

Change '[WMO182, "Showalter's stability index"]' to '[WMO182, S1030, "Showalter's stability index"]'.

Table C.20 SIPLE_PASSEL_WIND_CHILL_INDEX, Reference

Change '[GMET]' to '[GMET, "wind-chill index"]'.

Table C.20 SNOW_ACCUM_DEPTH_EQUIVALENT, Reference

Change '[WMO182]' to '[WMO182, W0230, "water equivalent of snow"]'.

Table C.20 SOLAR_DIFFUSE_IRRADIANCE, Reference

Change '[WMO182]' to '[WMO182, R0630, "diffuse solar radiation"]'.

Table C.20 SOLAR_DIRECT_IRRADIANCE, Reference

Change '[WMO182]' to '[WMO182, R0750, "direct solar radiation"]'.

Table C.20 SOLAR_RADIATION_CUMULATIVE, Reference

Change '[GMET]' to '[JMCDM, "EARTH-SOLAR-RADIATION-ANALYSIS-FORECAST mean solar radiation rate"]'.

Table C.20 SPECIFIC_HEAT, Reference

Change '[WMO182, S2210]' to '[WMO182, S2210, "specific heat"]'.

Table C.20 SPECIFIC_HUMIDITY, Reference

Change '[WMO182, "specific humidity"]' to '[WMO182, S2230, "specific humidity"]'.

Table C.20 SPILLING_BREAKER_FRACTION, Supplemental References

Add '[JMCDM, "SURF-OBSERVATION spilling breakers percentage rate"]'.

Table C.20 STANTON_NUMBER, Reference

Change '[WMO182, S2690]' to '[WMO182, S2690, "Stanton number"]'.

Table C.20 SURFACE_BACKSCATTER, Reference

Change '[WMO182, "back-scattering"]' to '[WMO182, B0080, "back-scattering"]'.

Table C.20 SURFACE_EM_ABSORPTIVITY, Reference

Change '[GMET]' to '[GMET, "absorptivity"]'.

Table C.20 SURFACE_REFLECTIVITY, Reference

Change '[GMET]' to '[GMET, "reflectivity"]'.

Table C.20 SURFACE_WIND_SPEED, Reference

Change '[WMO182, S3850]' to '[WMO182, S3850, "surface wind"]'.

Table C.20 SURGING_BREAKER_FRACTION, Supplemental References

Add '[JMCDM, "SURF-OBSERVATION surging breakers percentage rate"]'.